63 lines
3.9 KiB
Markdown
63 lines
3.9 KiB
Markdown
Odroid HC4
|
||
===
|
||
|
||
[](https://bookstack.delmar.bzh/uploads/images/gallery/2024-05/4kugAUKiY1KhcIBa-hc4-board.webp)
|
||
|
||
##### Specifications
|
||
|
||
<div class="level2" id="bkmrk-form-factor-board-di"><div class="table-responsive"><table class="inline table table-striped table-bordered table-hover table-condensed"><tbody><tr class="row0"><th class="col0 leftalign">Form Factor</th><td class="col1 leftalign">Board Dimensions: 84mm x 90.5mm x 25.0mm
|
||
Heatsink Dimensions: 40mm x 32mm x 10mm
|
||
Weight: 280g including heatsink, fan and case</td></tr><tr class="row1"><th class="col0 leftalign">Processor</th><td class="col1 leftalign">Amlogic S905X3 Processor
|
||
L1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor
|
||
L1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor
|
||
L3 data cache: 512KB , 16-way set associative (512 sets), 64 byte lines, shared by 4 processors
|
||
|
||
Quad-Core Cortex-A55 (1.800GHz)
|
||
ARMv8-A architecture with Neon and Crypto extensions
|
||
Mali-G31 MP2 GPU with 4 x Execution Engines (650Mhz)</td></tr><tr class="row2"><th class="col0 leftalign">Memory</th><td class="col1 leftalign">DDR4 4GiB with 32-bit bus width
|
||
Data rate: 2640 MT/s (PC4-21333 grade)
|
||
1.2Volt low power design</td></tr><tr class="row3"><th class="col0 leftalign">Storage</th><td class="col1 leftalign">1x Micro SD slot (DS/HS mode up to UHS-I SDR104)</td></tr><tr class="row4"><th class="col0 leftalign">Networking</th><td class="col1 leftalign">1 x GbE <abbr data-original-title="Local Area Network" title="">LAN</abbr> ports (RJ45, supports 10/100/1000 Mbps)
|
||
- Realtek RTL8211F (Ethernet transceiver)
|
||
- LED indicators
|
||
\* Green LED: Flashing by data traffics at 100Mbps connection
|
||
\* Amber LED: Flashing by data traffics at 1000Mbps connection</td></tr><tr class="row5"><th class="col0 leftalign">Video</th><td class="col1 leftalign">1 x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID)
|
||
Although the +5V Power pin is able to supply a mininum of 300mA, a sink shall not draw more than 50mA of current from the +5V Power pin.</td></tr><tr class="row6"><th class="col0 leftalign">Audio</th><td class="col1 leftalign">1 x HDMI digital output</td></tr><tr class="row7"><th class="col0 leftalign">Cooler</th><td class="col1 leftalign">1 x Passive heatsink ( 40x32x10 mm ) on the CPU of PCB board
|
||
1 x Hydraulic Bearing FAN
|
||
- Rated Voltage : 5V
|
||
- Rated Current : 100mA
|
||
- Max Speed RPM : 4,000
|
||
- Air Flow CFM : 4.3
|
||
- Air Pressure (In H2O) : 0.053
|
||
- Noise Level(dBA) : 23.9
|
||
- Dimension : 40 x 40 x 10.6 mm
|
||
- Wire & Connector : 80mm, 4 pin 1.25mm pitch</td></tr><tr class="row8"><th class="col0 leftalign">External I/O</th><td class="col1 leftalign">1 x USB 2.0 host port
|
||
1 x Debug serial console (UART)
|
||
2 x SATA Connectors</td></tr><tr class="row9"><th class="col0 leftalign">Other features</th><td class="col1 leftalign">IR receiver for remote controller
|
||
System LED Indicators:
|
||
- Red (POWER) – Solid light when DC power is connected
|
||
- Blue (ALIVE) – Flashing like heartbeat while Kernel is running. Solid On in the u-boot stage. Turns off if there is no bootable media.
|
||
- Red (HDD/SSD active) - Flashing while SATA HDD/SSD are reading or writing.</td></tr><tr class="row10"><th class="col0 leftalign">Power</th><td class="col1 leftalign">1 x DC jack : outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mm
|
||
DC input : 14.5V ~ 15.5V
|
||
\- DC 15V/4A power adapter is recommended
|
||
Power consumption with two ST2000DM006 HDDs :
|
||
\- IDLE(with HDD in spin-down) : ≃ 5.88W
|
||
\- Active(using SAMBA): ≃ 15.59W
|
||
\- Suspend: ≃ 0.29W
|
||
|
||
</td></tr></tbody></table>
|
||
|
||
</div></div>##### Setup
|
||
|
||
> sheldon (192.168.1.16)
|
||
> pleb/transatlantique
|
||
|
||
```
|
||
Choose "Exit to shell"
|
||
(switch to console then)
|
||
# netboot_default
|
||
# exit
|
||
(back to petiboot menu)
|
||
```
|
||
|
||
> Choose OS from the net install-able" image list...
|