First commit

tools/dremel/scad/base.scad

@@ -0,0 +1,77 @@
+$fn=60;
+
+include <BOSL2/std.scad>
+include <BOSL2/shapes2d.scad>
+include <boltsos_0.4.1/BOLTS.scad>
+
+CORNER_RADIUS = 3;
+holder_height=60;
+
+module screw_hole() {
+    rotate([0,90,0]) {
+        cylinder(h=3,d=8);
+        cylinder(h=20,d=4.5);
+    }
+}
+
+module screw_mount() {
+    rotate([90,0,0]) {
+        cyl(l=16, d=20, rounding=2);
+    }
+    translate([0,8,0]) {
+        rotate([90,0,0]) {
+            cyl(l=5, d=15, rounding=2);
+        }
+    }
+} 
+
+
+// Tube
+* color("grey") {
+    translate([0,0,150]) {
+        tube(od=20,wall=1,h=300);
+    }
+}
+
+// Tube holder
+color("red") {
+    difference() {
+        union() {
+            translate([0,0,25]) {
+                cyl(l=holder_height, d=40, rounding=2);
+            }
+            translate([-25,0,25]) {
+                cuboid([17,16,holder_height-6], rounding=2);
+            }
+            translate([-30,0,10]) {
+                screw_mount();
+            }
+            translate([-30,0,40]) {
+                screw_mount();
+            }            
+        }
+        translate([0,0,1.5]) {
+            cylinder(h=holder_height,d=21);
+        }
+        translate([-40,-1,-10]) {
+                cube([45,2,70]);
+        }
+        cylinder(h=10,d=10,center=true);
+    // Main screw hole
+        translate([-30,8,10]) {
+            rotate([90,0,0]) {
+                DIN931("M5");
+            }
+        }
+        translate([-30,8,40]) {
+            rotate([90,0,0]) {
+                DIN931("M5");
+            }
+        }
+    }
+}
+
+// Plate
+color("cyan") {
+
+}

tools/dremel/scad/d3000_support.scad

@@ -0,0 +1,70 @@
+$fn=60;
+
+include <BOSL2/std.scad>
+include <BOSL2/shapes2d.scad>
+include <boltsos_0.4.1/BOLTS.scad>
+
+CORNER_RADIUS = 3;
+
+module screw_hole() {
+    rotate([0,90,0]) {
+        DIN931("M4");
+        cylinder(h=30,d=4.5,center=true);
+    }
+}
+
+module plate_mount() {
+    rotate([0,90,0]) {
+        cyl(l=5, d=12, rounding=2);
+    }
+}
+
+// Dremel
+* translate([-36,0,33]) {
+    color("cyan", alpha=.25) {
+        cylinder(h=60, d1=30, d2=60, center=true);
+        
+        translate([0,0,-40]) cylinder(h=20, d=18.5, center=true);
+        translate([0,0,-40]) cylinder(h=18, d=34, center=true);
+    }
+}
+// Plate
+color("grey") {
+    translate([-36,0,0]) {
+        tube(od=50, wall=9, h=5, rounding=1);
+        translate([0,0,-1.75]) tube(od=36, wall=8.5, h=1.5);
+    }
+    difference() {
+        union() {
+            translate([0,0,7.5]) {
+            cuboid([6,70,20], rounding=2);
+            }
+            translate([-21,0,7.5]) {
+                rotate([0,0,90]) {
+                    wedge([46,40,20], center=true);
+                }
+            }
+            translate([-1.5,-28,8]) {
+                plate_mount();
+            }
+            translate([-1.5,28,8]) {
+                plate_mount();
+            }
+        }
+    translate([-1.5,-28,8]) {
+        screw_hole();
+    }
+    translate([-1.5,28,8]) {
+        screw_hole();
+    }
+    // Dremel
+    translate([-36,0,33]) {
+        color("cyan", alpha=.25) {
+            cylinder(h=60, d1=30, d2=60, center=true);
+            translate([0,0,-24]) cylinder(h=15, d1=31, d2=68, center=true);
+            translate([0,0,-40]) cylinder(h=20, d=18.5, center=true);
+            translate([0,0,-40]) cylinder(h=18, d=34, center=true);
+        }
+    }
+    }
+}

tools/dremel/scad/lever_fix.scad

@@ -0,0 +1,35 @@
+$fn=128;
+
+difference() {
+    union() {
+        cylinder(h=30,d=23);
+        scale([1,1,0.5]) {
+            sphere(d=23);
+        }
+        translate([0,0,7]) {
+            rotate([0,90,0]) {
+                difference() {
+                    cylinder(h=40,d1=24,d2=16);
+                    cylinder(h=40,d=12.5);
+                }
+            }
+        }
+    }
+    translate([-12,-5,-3]) {
+        cube([1.5,10,34]);
+    }
+    translate([0,0,-6]) {
+        cylinder(h=36.5,d=16.5);
+    }
+    translate([0,0,12]) {
+        cylinder(h=21,d=12);
+    }    
+}
+difference() {
+   translate([0,0,24]) {
+       cylinder(h=3,d=18);
+   }
+   translate([0,0,20]) {
+        cylinder(h=10,d=12);
+    }
+}    

tools/dremel/scad/lever_knob.scad

@@ -0,0 +1,16 @@
+$fn=128;
+
+rotate([180,0,0]) {
+    difference() {
+        union() {
+            scale([1,1,0.6]) {
+                sphere(d=22);
+            }
+            cylinder(h=20,d1=22,d2=16);
+            }
+        scale([1,1,0.5]) {
+            sphere(d=12.5);
+        }
+        cylinder(h=20,d=12.5);
+    }
+}

tools/dremel/scad/lever_mid.scad

@@ -0,0 +1,41 @@
+$fn=60;
+
+include <BOSL2/std.scad>
+include <BOSL2/shapes2d.scad>
+
+height=12;
+outer_diam=30;
+inner_diam=13;
+
+// Tube
+* color("grey") {
+    tube(od=12,wall=1,h=100);
+}
+
+// Ring
+difference() {
+    tube(od=outer_diam,wall=8,h=height,rounding=2);
+//
+    color("red") {
+        rotate([0,90,0]) {
+            cylinder(h=20,d=3.5);
+            translate([0,0,-16]) {
+                cylinder(h=10,d=6);
+            }
+            translate([0,0,6]) {
+                cylinder(h=4,d=6);
+            }
+        }
+    }
+
+}
+
+
+* color("green") {
+    translate([-12,0,15]) {
+        rotate([0,-90,0]) {
+            cylinder(h=21, d=3.5);
+            cylinder(h=5, d=8.5);
+        }
+    }
+}

tools/dremel/scad/reduc_.scad

@@ -0,0 +1,16 @@
+$fn=128;
+
+height=25;
+outer=21;
+inner=20;
+
+difference() {
+    union() {
+        cylinder(h=height,d=outer);
+        cylinder(h=3,d=outer+5);
+    }
+    cylinder(h=height,d=inner);
+    translate([-10,0,height/2]) {
+        cube([10,2,height], center=true);
+    }
+}

tools/dremel/scad/tool_holder.scad

@@ -0,0 +1,161 @@
+$fn=60;
+
+include <BOSL2/std.scad>
+include <BOSL2/shapes2d.scad>
+include <boltsos_0.4.1/BOLTS.scad>
+
+CORNER_RADIUS = 3;
+
+module screw_hole() {
+    rotate([0,90,0]) {
+        cylinder(h=3,d=8);
+        cylinder(h=20,d=4.5);
+    }
+}
+
+module plate_mount() {
+    rotate([0,90,0]) {
+        cyl(l=5, d=12, rounding=2);
+    }
+}
+
+// Tube
+* color("grey") {
+    translate([0,0,150]) {
+        tube(od=20,wall=1,h=300);
+    }
+}
+/// Tube holder
+color("red") {
+    difference() {
+        union() {
+            translate([0,0,25]) {
+                cyl(l=50, d=40, rounding=2);
+            }
+            translate([-23,0,25]) {
+                cuboid([18,16,50], rounding=2);
+            }
+            translate([-25,0,25]) {
+                rotate([90,0,0]) {
+                    cyl(l=16, d=20, rounding=2);
+                }
+            }
+            translate([-25,8,25]) {
+                rotate([90,0,0]) {
+                    cyl(l=5, d=15, rounding=2);
+                }
+            }
+        }
+        translate([0,0,1.5]) {
+            cylinder(h=50,d=21);
+        }
+        translate([-40,-1,0]) {
+                cube([45,2,50]);
+        }
+        cylinder(h=5,d=16);
+    // Main screw hole
+        translate([-25,8,25]) {
+            rotate([90,0,0]) {
+                DIN931("M5");
+            }
+        }
+    }
+}
+// Plate
+color("cyan") {
+    difference() {
+        union() {
+            translate([20,0,60]) {
+                cuboid([15,10,120], rounding=2);
+            }
+            translate([18,0,25]) {
+                cuboid([15,30,50], rounding=2);
+            }
+            translate([25,0,60]) {
+                cuboid([10,70,120], rounding=2);
+            }
+        // Plate mounts
+            // Right side
+            translate([20,-28,0]) {
+                translate([0,0,8]) {
+                    plate_mount();
+                }
+                translate([0,0,34]) {
+                    plate_mount();
+                }
+                translate([0,0,60]) {
+                    plate_mount();
+                }
+                translate([0,0,86]) {
+                    plate_mount();
+                }
+                translate([0,0,112]) {
+                    plate_mount();
+                }
+            }
+            // Left side
+            translate([20,28,0]) {
+                translate([0,0,8]) {
+                    plate_mount();
+                }
+                translate([0,0,34]) {
+                    plate_mount();
+                }
+                translate([0,0,60]) {
+                    plate_mount();
+                }
+                translate([0,0,86]) {
+                    plate_mount();
+                }
+                translate([0,0,112]) {
+                    plate_mount();
+                }
+            }
+        // Lever mount
+            translate([25,0,118]) {
+                rotate([90,0,0]) {
+                    cyl(l=70, d=10, rounding=2);
+                }
+            }
+        }
+    // Screw holes
+        // Right side 
+        translate([17.5,-28,8]) {
+            screw_hole();
+            translate([0,0,26]) {
+                screw_hole();
+            }
+            translate([0,0,52]) {
+                screw_hole();
+            }
+            translate([0,0,78]) {
+                screw_hole();
+            }
+            translate([0,0,104]) {
+                screw_hole();
+            }
+        }
+        // Left side 
+        translate([17.5,28,8]) {
+            screw_hole();
+            translate([0,0,26]) {
+                screw_hole();
+            }
+            translate([0,0,52]) {
+                screw_hole();
+            }
+            translate([0,0,78]) {
+                screw_hole();
+            }
+            translate([0,0,104]) {
+                screw_hole();
+            }
+        }
+        // Lever screw hole
+        translate([25,0,118]) {
+            rotate([90,0,0]) {
+                cylinder(h=70,d=3,center=true);
+            }
+        }
+    }
+}

tools/dremel/scad/top_knob.scad

@@ -0,0 +1,55 @@
+$fn=60;
+
+include <BOSL2/std.scad>
+include <BOSL2/shapes2d.scad>
+include <boltsos_0.4.1/BOLTS.scad>
+
+CORNER_RADIUS = 3;
+
+holder_height=20;
+outer_diam=50;
+inner_diam=20.6;
+
+module screw_hole() {
+    rotate([0,90,0]) {
+        cylinder(h=3,d=8);
+        cylinder(h=20,d=4.5);
+    }
+}
+
+module screw_mount() {
+    rotate([90,0,0]) {
+        cyl(l=16, d=20, rounding=2);
+    }
+    translate([0,8,0]) {
+        rotate([90,0,0]) {
+            cyl(l=5, d=15, rounding=2);
+        }
+    }
+} 
+
+
+// Tube
+* color("grey") {
+    translate([0,0,150]) {
+        tube(od=20,wall=1,h=300);
+    }
+}
+
+// Tube holder
+color("red") {
+    difference() {
+        union() {
+            cyl(l=holder_height, d=outer_diam, rounding=2);
+            translate([0,0,holder_height/2]) {
+                cyl(l=holder_height/2, d=outer_diam-20, rounding=2);
+            }
+        }
+        translate([0,0,7]) {
+            cyl(l=holder_height,d=inner_diam, rounding=1);
+        }
+        rotate([0,90,0]) {
+            cyl(l=outer_diam+10,d=3.2);
+        }
+    }
+}