Updates

tir_sportif/dioptre/gcode/README.md

@@ -0,0 +1,29 @@
+### gCode files
+
+Sent to [OctoPrint](https://octoprint.org) with the setting below :
+
+#### Cura Print settings (Ender 3 V3 SE / PETG_alt)
+- Layer Height : 0,2 mm
+- Initial Layer Height : 0,2 mm
+- Line Width : 0,4 mm
+- Wall Thickness : 1,6 mm
+- Top/Bottom Thickness : 2 mm
+- Infill Density : 20%
+- Infill Pattern : Grid (Gyroid ?)
+- Printing temperature : 250°C
+- Build Plate temperature : 80°C
+- Print Speed : 60 mm/s
+- Enable Retraction (Yes)
+- Retraction Distance : 3,5 mm
+- Retraction Speed : 40 mm/s
+- Combing Mode : Not in Skin
+- Enable Print Cooling (Yes)
+- Fan Speed : 50%
+- Support (None)
+
+#### Estimates
+| Infill | Weight | Length | Cost |
+| --- | --- | --- | --- |
+| 20% | 240g | 73,56 m | 4€32 |
+| 30% | 255g | 83,34 m | 4€58 |
+| 50% | 284g | 90,08 m | 5€12 |