### Support Pistolet / Stand

| Front | Back |
| --- | --- |
| ![Front view](images/support_pistolet_stand_v2_front.png "Front view") | ![Back view](images/support_pistolet_stand_v2_back.png "Back view") |

| Éléments | . |
| --- | --- |
| Base <br /> ![Base](images/base.png "Base") <br /> [support_pistolet_stand_v2_base.stl](stl/support_pistolet_stand_v2_base.stl) | Tower <br /> ![Tower](images/tower.png "Tower") <br /> [support_pistolet_stand_v2_tower.stl](stl/support_pistolet_stand_v2_tower.stl) |
| Plate <br /> ![Plate](images/plate.png "Plate") <br /> [support_pistolet_stand_v2_plate.stl](stl/support_pistolet_stand_v2_plate.stl) | Mag Holder <br /> ![Mag Holder](images/mag_holder.png "Mag Holder") <br /> [support_pistolet_stand_v2_mag_holder.stl](stl/support_pistolet_stand_v2_mag_holder.stl) |
| Grip Plate <br /> ![Grip Plate](images/grip_plate.png "Grip Plate") <br /> [support_pistolet_stand_v2_grip_plate.stl](stl/support_pistolet_stand_v2_grip_plate.stl) |  |

#### OpenSCAD Libraries
- [BOSL2](https://github.com/BelfrySCAD/BOSL2)

#### Cura Print settings (Ender 3 V3 SE / PETG_alt)
- Layer Height : 0,2 mm
- Initial Layer Height : 0,2 mm
- Line Width : 0,4 mm
- Wall Thickness : 1,6 mm
- Top/Bottom Thickness : 2 mm
- Infill Density : 20%
- Infill Pattern : Grid (Gyroid ?)
- Printing temperature : 250°C
- Build Plate temperature : 80°C
- Print Speed : 60 mm/s
- Enable Retraction (Yes)
- Retraction Distance : 3,5 mm
- Retraction Speed : 40 mm/s
- Combing Mode : Not in Skin
- Enable Print Cooling (Yes)
- Fan Speed : 50%
- Support (None)

#### Links
- [OpenSCAD](https://openscad.org/index.html)
- [UltiMaker Cura](https://ultimaker.com/software/ultimaker-cura/)
- [OctoPrint](https://octoprint.org)

#### Hardware
- N/A