gCode files
Sent to OctoPrint with the setting below :
Cura Print settings (Ender 3 V3 SE / PETG_alt)
- Layer Height : 0,2 mm
- Initial Layer Height : 0,2 mm
- Line Width : 0,4 mm
- Wall Thickness : 1,6 mm
- Top/Bottom Thickness : 2 mm
- Infill Density : 20%
- Infill Pattern : Grid (Gyroid ?)
- Printing temperature : 250°C
- Build Plate temperature : 80°C
- Print Speed : 60 mm/s
- Enable Retraction (Yes)
- Retraction Distance : 3,5 mm
- Retraction Speed : 40 mm/s
- Combing Mode : Not in Skin
- Enable Print Cooling (Yes)
- Fan Speed : 50%
- Support (None)
Estimates
| Infill | Weight | Length | Cost |
|---|---|---|---|
| 20% | 240g | 73,56 m | 4€32 |
| 30% | 255g | 83,34 m | 4€58 |
| 50% | 284g | 90,08 m | 5€12 |