3D/tir_sportif/support_pistolet_stand

Support Pistolet / Stand

Front	Back

Éléments	.
Base base_v2.stl	Tower tower_v2.stl
Blank Plate plate_v2.stl	Mod Plate 22mm mod_plate_v2.stl
Grip Plate grip_plate_v2.stl	Mag Holder holder_v2.stl

OpenSCAD Libraries

• BOSL2

Cura Print settings (Ender 3 V3 SE / PETG_alt)

• Layer Height : 0,2 mm
• Initial Layer Height : 0,2 mm
• Line Width : 0,4 mm
• Wall Thickness : 1,6 mm
• Top/Bottom Thickness : 2 mm
• Infill Density : 20%
• Infill Pattern : Grid (Gyroid ?)
• Printing temperature : 250°C
• Build Plate temperature : 80°C
• Print Speed : 60 mm/s
• Enable Retraction (Yes)
• Retraction Distance : 3,5 mm
• Retraction Speed : 40 mm/s
• Combing Mode : Not in Skin
• Enable Print Cooling (Yes)
• Fan Speed : 50%
• Support (None)

Links

• OpenSCAD
• UltiMaker Cura
• OctoPrint

Hardware

• N/A