1.4 KiB
1.4 KiB
Support Pistolet / Stand
| Élément | Vue | Fichier |
|---|---|---|
| Base |  |
support_pistolet_stand_v2_base.stl |
| Tower |  |
support_pistolet_stand_v2_tower.stl |
| Mag Holder |  |
support_pistolet_stand_v2_mag_holder.stl |
OpenSCAD Libraries
Cura Print settings (Ender 3 V3 SE / PETG_alt)
- Layer Height : 0,2 mm
- Initial Layer Height : 0,2 mm
- Line Width : 0,4 mm
- Wall Thickness : 1,6 mm
- Top/Bottom Thickness : 2 mm
- Infill Density : 20%
- Infill Pattern : Grid (Gyroid ?)
- Printing temperature : 250°C
- Build Plate temperature : 80°C
- Print Speed : 60 mm/s
- Enable Retraction (Yes)
- Retraction Distance : 3,5 mm
- Retraction Speed : 40 mm/s
- Combing Mode : Not in Skin
- Enable Print Cooling (Yes)
- Fan Speed : 50%
- Support (None)
Links
Hardware
- N/A