"Updates"

Turing Pi/odroid-hc4.md

@@ -0,0 +1,62 @@
+Odroid HC4
+===
+
+[![hc4-board.webp](https://bookstack.delmar.bzh/uploads/images/gallery/2024-05/scaled-1680-/4kugAUKiY1KhcIBa-hc4-board.webp)](https://bookstack.delmar.bzh/uploads/images/gallery/2024-05/4kugAUKiY1KhcIBa-hc4-board.webp)
+
+##### Specifications
+
+<div class="level2" id="bkmrk-form-factor-board-di"><div class="table-responsive"><table class="inline table table-striped table-bordered table-hover table-condensed"><tbody><tr class="row0"><th class="col0 leftalign">Form Factor</th><td class="col1 leftalign">Board Dimensions: 84mm x 90.5mm x 25.0mm  
+Heatsink Dimensions: 40mm x 32mm x 10mm  
+Weight: 280g including heatsink, fan and case</td></tr><tr class="row1"><th class="col0 leftalign">Processor</th><td class="col1 leftalign">Amlogic S905X3 Processor  
+L1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor  
+L1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor  
+L3 data cache: 512KB , 16-way set associative (512 sets), 64 byte lines, shared by 4 processors  
+  
+Quad-Core Cortex-A55 (1.800GHz)  
+ARMv8-A architecture with Neon and Crypto extensions  
+Mali-G31 MP2 GPU with 4 x Execution Engines (650Mhz)</td></tr><tr class="row2"><th class="col0 leftalign">Memory</th><td class="col1 leftalign">DDR4 4GiB with 32-bit bus width  
+Data rate: 2640 MT/s (PC4-21333 grade)  
+1.2Volt low power design</td></tr><tr class="row3"><th class="col0 leftalign">Storage</th><td class="col1 leftalign">1x Micro SD slot (DS/HS mode up to UHS-I SDR104)</td></tr><tr class="row4"><th class="col0 leftalign">Networking</th><td class="col1 leftalign">1 x GbE <abbr data-original-title="Local Area Network" title="">LAN</abbr> ports (RJ45, supports 10/100/1000 Mbps)  
+- Realtek RTL8211F (Ethernet transceiver)  
+- LED indicators  
+\* Green LED: Flashing by data traffics at 100Mbps connection  
+\* Amber LED: Flashing by data traffics at 1000Mbps connection</td></tr><tr class="row5"><th class="col0 leftalign">Video</th><td class="col1 leftalign">1 x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID)  
+Although the +5V Power pin is able to supply a mininum of 300mA, a sink shall not draw more than 50mA of current from the +5V Power pin.</td></tr><tr class="row6"><th class="col0 leftalign">Audio</th><td class="col1 leftalign">1 x HDMI digital output</td></tr><tr class="row7"><th class="col0 leftalign">Cooler</th><td class="col1 leftalign">1 x Passive heatsink ( 40x32x10 mm ) on the CPU of PCB board  
+1 x Hydraulic Bearing FAN  
+- Rated Voltage : 5V  
+- Rated Current : 100mA  
+- Max Speed RPM : 4,000  
+- Air Flow CFM : 4.3  
+- Air Pressure (In H2O) : 0.053  
+- Noise Level(dBA) : 23.9  
+- Dimension : 40 x 40 x 10.6 mm  
+- Wire &amp; Connector : 80mm, 4 pin 1.25mm pitch</td></tr><tr class="row8"><th class="col0 leftalign">External I/O</th><td class="col1 leftalign">1 x USB 2.0 host port  
+1 x Debug serial console (UART)  
+2 x SATA Connectors</td></tr><tr class="row9"><th class="col0 leftalign">Other features</th><td class="col1 leftalign">IR receiver for remote controller  
+System LED Indicators:  
+- Red (POWER) – Solid light when DC power is connected  
+- Blue (ALIVE) – Flashing like heartbeat while Kernel is running. Solid On in the u-boot stage. Turns off if there is no bootable media.  
+- Red (HDD/SSD active) - Flashing while SATA HDD/SSD are reading or writing.</td></tr><tr class="row10"><th class="col0 leftalign">Power</th><td class="col1 leftalign">1 x DC jack : outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mm  
+DC input : 14.5V ~ 15.5V  
+\- DC 15V/4A power adapter is recommended  
+Power consumption with two ST2000DM006 HDDs :  
+\- IDLE(with HDD in spin-down) : ≃ 5.88W  
+\- Active(using SAMBA): ≃ 15.59W  
+\- Suspend: ≃ 0.29W
+
+</td></tr></tbody></table>
+
+</div></div>##### Setup
+
+> sheldon (192.168.1.16)
+> pleb/transatlantique
+
+```
+Choose  "Exit to shell"
+(switch to console then)
+# netboot_default
+# exit
+(back to petiboot menu)
+```
+
+&gt; Choose OS from the net install-able" image list...