Updates

tir_sportif/support_pistolet_stand/README.md

@@ -0,0 +1,39 @@
+### Support Pistolet / Stand
+
+![Support Pistolet / Stand : vue complète](images/support_pistolet_stand_v2_front.png "Support Pistolet / Stand : vue complète")
+
+| Élément | Vue | Fichier |
+| --- | --- | --- |
+| Base | ![Base](images/base.png "Base") | [support_pistolet_stand_v2_base.stl](stl/support_pistolet_stand_v2_base.stl) |
+| Tower | ![Tower](images/tower.png "Tower") | [support_pistolet_stand_v2_tower.stl](stl/support_pistolet_stand_v2_tower.stl) |
+| Mag Holder | ![Mag Holder](images/mag_holder.png "Mag Holder") | [support_pistolet_stand_v2_mag_holder.stl](stl/support_pistolet_stand_v2_mag_holder.stl) |
+
+#### OpenSCAD Libraries
+- [BOSL2](https://github.com/BelfrySCAD/BOSL2)
+
+#### Cura Print settings (Ender 3 V3 SE / PETG_alt)
+- Layer Height : 0,2 mm
+- Initial Layer Height : 0,2 mm
+- Line Width : 0,4 mm
+- Wall Thickness : 1,6 mm
+- Top/Bottom Thickness : 2 mm
+- Infill Density : 20%
+- Infill Pattern : Grid (Gyroid ?)
+- Printing temperature : 250°C
+- Build Plate temperature : 80°C
+- Print Speed : 60 mm/s
+- Enable Retraction (Yes)
+- Retraction Distance : 3,5 mm
+- Retraction Speed : 40 mm/s
+- Combing Mode : Not in Skin
+- Enable Print Cooling (Yes)
+- Fan Speed : 50%
+- Support (None)
+
+#### Links
+- [OpenSCAD](https://openscad.org/index.html)
+- [UltiMaker Cura](https://ultimaker.com/software/ultimaker-cura/)
+- [OctoPrint](https://octoprint.org)
+
+#### Hardware
+- N/A